Ceramic Fibre Blanket
Flexible, lightweight alumina-silica blanket for high-temperature insulation and wrapping.
- 1260°C
- 128 kg/m³
- 7620×610×25mm / 3600×610×50mm
- Furnace wrapping
- Kiln insulation
- Expansion joints
Materials store
Insulation & Refractory Products
A trusted single source for industrial thermal insulation, refractory, sealing and safety materials — supplied in retail packs and bulk orders, delivered across Kenya and the wider East Africa region.
Featured Materials
A snapshot of materials we stock. Browse the full range by category below.
Ceramic Fibre Insulation
High-purity alumina-silica ceramic fibre for extreme heat — furnaces, kilns and heat-treatment, rated to 1260°C.
Ceramic Fibre Board
Rigid alumina-silica panel offering thermal resistance and structural strength.
- 1260°C
- 320 kg/m³
- 600×300×50mm
- Furnace linings
- Fire protection
- Back-up insulation
Non-Asbestos Ceramic Fibre Tape
Heat-resistant woven tape for wrapping and sealing pipes, flanges and furnace doors.
- 1260°C
- 10m × 3mm × 50mm
- Pipe wrapping
- Flange sealing
- Furnace doors
Ceramic Fibre Rope
Braided round & square rope for sealing high-temperature joints in kilns and stoves.
- 1260°C
- Thickness 6–50mm
- Furnace door seals
- Boiler seals
- Kiln gaskets
Ceramic Fibre Cloth
Woven fabric (plain or foil-backed) for heat shielding and insulation wrapping.
- 1260°C
- 30m × 1m × 3mm
- Heat shields
- Removable covers
- Expansion joints
Ceramic Fibre Yarn / Thread
Twisted high-temperature fibre for stitching, gasketing and packing.
- 1260°C
- Stitching insulation
- Gasketing
- Packing
Mineral Wool & Fibreglass
Non-combustible stone-wool and glass-wool for thermal and acoustic insulation of tanks, pipes, ducts and buildings.
Rockwool Rolls / Blankets
Flexible basalt stone-wool roll (mesh-reinforced) for high-temperature pipe, tank and duct insulation.
- 1000°C
- 100 kg/m³
- 6m×1m×50mm / 3m×1m×75/100mm
- Pipe & tank lagging
- Duct insulation
- Acoustic walls
Rockwool Batts / Slabs
Rigid stone-wool panels for thermal, acoustic and fire protection in walls, roofs and plant.
- 1000°C
- 50 kg/m³
- 1.2m×0.6m×50/100mm
- Walls & roofs
- Fire protection
- Industrial equipment
Preformed Rockwool Pipe Sections
Rigid cylindrical stone-wool sections for hot and cold pipe insulation.
- 1000°C
- 150 kg/m³
- Bore ½–6in, 25/50mm wall
- Steam pipes
- Chilled pipes
- Process lines
Fibreglass Rolls / Blankets
Lightweight glass-wool roll for thermal and acoustic insulation of roofs, ducting and HVAC.
- 350–450°C
- 24 kg/m³
- 20m/10m × 1.2m × 50/100mm
- Roofing
- HVAC ducting
- Walls
Fibreglass Batts / Slabs
Pre-cut glass-fibre panels for efficient thermal and acoustic insulation.
- 350–450°C
- 32 kg/m³
- 1.2m×0.6m×50/100mm
- Walls & ceilings
- Partitions
- HVAC
Foam, Roof & Board Insulation
Elastomeric foam, roof insulation and rigid boards for condensation control, energy savings and fire-rated insulation.
Armaflex Insulation Sheet / Roll
Closed-cell elastomeric foam with built-in vapour barrier for condensation control on HVAC and chilled lines.
- -40 to 120°C
- 80 kg/m³
- 8m×1m×25mm / 10m×1m×19mm
- Chilled-water pipes
- Refrigeration
- Condensation control
Armaflex with Foil & Adhesive
Foil-laminated, self-adhesive elastomeric foam for superior heat reflection and quick installation.
- -40 to 120°C
- Foil + adhesive backing
- Duct wrap
- Radiant heat reflection
- Pipe insulation
Styrofoam (EPS) Sheets
Lightweight expanded-polystyrene board and flexible foam for cold rooms, roofs and packaging.
- 1.2m × 1.2m / 4ft × 4ft
- ½–4in thickness
- Cold rooms
- Roofs & walls
- Expansion joint filler
Polyethylene Roof Insulation
Double-laminated reflective PE foam — a radiant barrier and moisture barrier for roofs and metal structures.
- Double laminated
- 40m×1.5m×2/3mm / 50m×1.2m×10mm
- Metal roofs
- Warehouses
- Cold storage
Calcium Silicate Boards
Rigid, load-bearing silica-lime board with high fire resistance and dimensional stability.
- 1000°C
- 230 kg/m³
- 600×300×50mm
- Furnace linings
- Boiler insulation
- Pipe & wall panels
Asbestos-Free Millboards
Compressed mineral-fibre panels for high-temperature insulation in furnaces, fire doors and boilers.
- Up to 1100°C
- 1m×1m × 3–12mm
- Furnace linings
- Fire doors
- Heat containment
Tapes, Foil & Sealants
Thermal and waterproof tapes, reflective foil and fire-rated sealants for finishing and sealing insulation systems.
Aluminium Insulation Thermal Tape
High-temperature foil tape for thermal insulation, heat shielding and sealing hot surfaces.
- 2" × 18m and 3" × 18m
- Pipe wrapping
- Heat sealing
- Duct finishing
Butyl Waterproof Sealing Tape
Self-adhesive butyl-rubber tape for waterproofing, air sealing and moisture protection on most surfaces.
- 5m × 5cm and 10m × 10cm
- Roof sealing
- Joint waterproofing
- Air sealing
Aluminium Foil FSK
Reflective foil facing reinforced with fibreglass scrim and kraft paper — an effective vapour barrier.
- 100m × 1.2m wide
- HVAC duct facing
- Roof & wall vapour barrier
- Radiant barrier
Somafix Fire Sealant
Fire-rated silicone sealant for sealing joints, gaps and penetrations under high heat.
- Heat resistance 1500°C
- Fire-stopping
- Expansion joints
- Glazing & doors
Somafix PU Foam
Fire-retardant expanding polyurethane foam for filling, sealing and insulating voids and cavities.
- Fire-retardant (B2)
- Gap filling
- Sealing cavities
- Thermal & acoustic insulation
Refractory Bricks & Cements
Firebricks and refractory cements for lining furnaces, kilns, boilers and incinerators above 1000°C.
40% Alumina Firebricks
Balanced-grade fireclay bricks for furnace linings and general high-temperature applications.
- 1600°C
- Standard / Side & End Arch / Slab / Split
- 230×115×75mm
- Furnace linings
- Kilns
- Boilers
70% Alumina Firebricks
High-alumina bricks with strong slag and chemical resistance and high load-bearing strength.
- 1750–1800°C
- 230×115×75mm
- 5.2 kg
- Steel furnaces
- Incinerators
- Severe-duty kilns
Zirconia Firebricks
Zirconium-oxide bricks for the highest thermal and chemical resistance in glass and steel furnaces.
- 2000°C
- 230×115×38mm
- 2.2 kg
- Glass furnaces
- Steel ladles
- High-temp kilns
Insulating Firebricks
Lightweight, low-density bricks with low thermal conductivity to cut heat loss.
- 230×115×75mm
- 2 kg
- Furnaces & kilns
- Pizza ovens
- Chimneys
Refractory Castable — Maxheat-A
High-performance 90% alumina castable cement for lining furnaces, kilns and incinerators.
- 1750°C
- 90% Al₂O₃
- 25 kg bag
- Furnace linings
- Monolithic casting
- Repairs
Refractory Castable — Maxheat-K
Medium-duty 60% alumina castable with good strength and abrasion resistance.
- 1600°C
- 60% Al₂O₃
- 25 kg bag
- Kiln & furnace lining
- Fireplaces
- General repairs
Refractory Mortar — Maxset 50 Fine
Heat-resistant alumina-fireclay mortar for bonding firebricks and refractory components.
- 1500°C
- 25 kg bag
- Brick laying
- Jointing
- Furnace repairs
Insulating Castable — Maxlyte 11
Lightweight insulating refractory cement for continuous use up to 1300°C with low heat loss.
- 1300°C
- 25 kg bag
- Hot-face insulation
- Kiln lining
- Energy saving
Fondu Castable — Max-50
Fast-setting calcium-aluminate (CAC) cement for rapid kiln repairs and industrial flooring.
- 1000°C
- 25 kg bag
- Rapid kiln repairs
- Furnace flooring
- Early-strength linings
Acoustic, Safety & Sealing
Acoustic insulation, electrical safety matting, steam gaskets and loose-fill vermiculite for plant rooms and panels.
Knauf Acoustic Insulation Roll
High-performance glass-wool roll for superior sound absorption and thermal insulation.
- 16 kg/m³
- 13.5m × 1.2m × 50mm
- Walls & ceilings
- Partitions
- Plant rooms
Acoustic Foam Wedges & Panels
Open-cell foam wedges and fabric panels that absorb sound and reduce echo and reverberation.
- Wedges 30×30×50mm (12/box)
- Panels 1.2m×0.6m×50mm
- Studios
- Offices
- Quiet rooms
H.V Electrical Rubber Mats
Duratuf ASTM-D178 insulating matting that protects personnel from electric shock in switchrooms.
- Class 0–4 (10–50kV)
- 1m × 1m, 3.2–12.7mm
- 10m rolls
- Substations
- Switchrooms
- Control rooms
Steel Metallic Steam Gaskets
Superlite-5000 metallic gasket sheet for high-pressure, high-temperature steam flanges.
- 500–650°C
- 1500×1000mm
- 1.5–6mm
- Steam flanges
- Boilers
- High-pressure joints
Vermiculite (Exfoliated)
Lightweight, non-combustible loose-fill mineral for fireproofing and high-temperature linings.
- Up to 1100°C
- Medium & Large grade
- 10 kg bags
- Loose-fill insulation
- Fireproofing
- Refractory mixes
Need a material that isn't listed, or a bulk quotation for a project?
Request a product quoteGot downtime? Let's fix it fast.
Tell us the unit, machine or material you need. We'll respond with a clear, itemised quotation — by WhatsApp, phone or email.